Ranger Valve America

Technical Guide

What is a valve figure number, and how do you read one?

The short answer

A valve figure number is a manufacturer's code that describes one specific valve: its type, size, end connection, pressure class, body material, trim, operator and service, in a single string. The format belongs to each manufacturer. There is no industry-wide standard, so the same code means different things at different manufacturers. Read it field by field against that manufacturer's ordering guide.

Ranger Valve America Ltd. · Last reviewed

What a figure number tells you

Each position in the code stands for one choice. For a typical gate, globe or check valve the fields are:

  • Valve type, such as gate, globe, swing check or dual plate check
  • Size
  • End connection, such as raised face, ring-type joint or butt weld
  • ASME pressure class
  • Body material
  • Trim
  • Operator, such as handwheel, gear or bare stem
  • A separator for service conditions
  • Service, such as NACE, cryogenic or buried

Ball valves, triple offset butterfly valves and other designs add fields that matter to them, such as body construction, port type, ball, stem, seat and seal material.

Worked example: a RANGER gate valve

The figure number GA120R1W8G-N decodes as follows.

FieldCodeMeaning
Valve typeGAGate valve
Size12012 inch
EndsRRaised face
ASME class1Class 150
Body materialWWCB
API trim8Trim #8
OperatorGGear operator
Designator-Separator before the service code
ServiceNNACE

In words: a 12 inch, Class 150, raised face, WCB body gate valve with trim #8, a gear operator and NACE service.

Why figure numbers are not interchangeable

Each manufacturer builds its own coding system. A code from one catalog cannot be read against another's, and two valves that look alike on paper may differ in trim, bonnet design or testing. A cross-reference between manufacturers is a starting point, not a guarantee. Always check the written specification: type, size, class, ends, materials, trim, standard and service.

What to put in an RFQ

  • The figure number, if you have one, from the manufacturer you are comparing against
  • Valve type and the governing standard, for example API 6D or API 600
  • Size and ASME class (or API rated working pressure)
  • End connections
  • Body, trim and seat materials
  • Operator: handwheel, gear, bare stem or actuator
  • Service conditions, such as sour (NACE), cryogenic, buried, oxygen or high temperature
  • Documentation required, such as EN 10204 3.1 or 3.2 material certificates
  • Quantity and delivery requirements

RANGER figure numbers

RANGER publishes how-to-order codes for cast steel gate, globe and check valves, forged steel valves, API 6D trunnion and floating ball valves, API 6D through-conduit gate and check valves, API 609 triple offset butterfly valves, and threaded and socket weld ball valves. The full code tables are in the Figure Number & Ordering Guide, which you can request from catalogs and manuals.

RANGER works closely with customers to make sure products are accurately specified, matching figure numbers and model numbers to customer specification sheets. Send your specification sheet with your quote request.

Frequently asked questions

Is a figure number the same as a tag number?

No. A figure number identifies the valve configuration in the manufacturer's catalog. A tag number is the plant's own identifier for where a valve is installed.

Is there a standard format for figure numbers?

No. Each manufacturer defines its own, which is why a figure number has to be read against that manufacturer's ordering guide.

Can I send another manufacturer's figure number to get a RANGER quote?

Yes. Send it together with your specification sheet. RANGER matches figure numbers and model numbers to customer specification sheets, so the quote is checked against the written specification and not the code alone.

What does the letter after the dash mean?

On RANGER cast steel gate, globe and check valves the dash separates the main code from the service condition. N means NACE, C means cryogenic and B means buried.