The short answer
The API Monogram means the valve was made by a manufacturer that the American Petroleum Institute (API) has licensed for that specific standard, such as API 6D. API audited the factory's quality system (API Spec Q1) and its ability to build to the product specification, and the valve is marked with the monogram and the licence number. A valve built "to the intent of" an API standard carries only the manufacturer's own claim: nobody independent has audited the factory, and the valve cannot carry the monogram.
Ranger Valve America Ltd. · Last reviewed
What the API Monogram Program is
The API Monogram Program lets a manufacturer apply the API Monogram to a product only after API has licensed it to do so. To hold a licence, the manufacturer has to meet two sets of requirements: a quality management system that complies with API Spec Q1, which is the petroleum and natural gas industry's quality standard and builds on the requirements of ISO 9001, and the requirements of the product specification itself, for example API 6D for pipeline valves, API 600 for steel gate valves or API 6A for wellhead equipment.
A licence is specific: it is issued for a named specification and for a named manufacturing facility. A factory licensed for API 6D is not automatically licensed for API 600, and a licence for one plant does not cover valves made at another. Licensees are listed publicly on API's Composite List, so a buyer can check a manufacturer's claim without relying on the manufacturer.
What the audit and factory review involve
API sends its own auditors to the manufacturing facility. They examine whether the factory's documented procedures are actually followed on the shop floor and in the records. The areas reviewed include:
- The quality management system: documented procedures, internal audits, management review and corrective action.
- Design and development controls, including verification and validation of the design against the product specification.
- Purchasing and control of sub-suppliers and externally provided materials and processes.
- Material traceability and test reports, from receipt to the finished valve.
- Welding, heat treatment and non-destructive examination procedures, and the qualification of the people who perform them.
- Calibration of measuring and test equipment, and the production pressure tests required by the specification.
- Control of nonconforming product and the records that show how problems were closed out.
The licence is maintained through periodic audits. If the auditors find nonconformities, the manufacturer has to correct them, and API can act on the licence if they are not. A licence is therefore a continuing check on the factory and not a single certificate on a wall.
Monogrammed valve vs a valve built to the intent of API
| API monogrammed valve | Built "to the intent of" an API standard | |
|---|---|---|
| Who states that it conforms | The manufacturer, and API has licensed that statement | The manufacturer alone |
| Independent audit of the factory | Yes: API audits the facility | None required |
| Quality system | Compliant with API Spec Q1 | Whatever the manufacturer has: it may be ISO 9001, or nothing certified |
| Marking on the valve | API Monogram and the manufacturer's licence number | No monogram: it cannot be applied without a licence |
| Can the buyer verify it | Yes, on API's Composite List | Only by the buyer's own audit and inspection |
| If the factory stops following the standard | Audits can find it, and the licence is at risk | Nothing independent will find it |
A valve built "to the intent of" an API standard is not necessarily a bad valve. The point is that nothing independent confirms it. The buyer carries the verification work and the risk, and has only the manufacturer's word that the standard was followed. Phrases such as "designed to API 6D" or "per API 6D" say nothing about whether the factory has ever been audited.
Why it matters to a buyer
- Independent verification: the buyer does not have to audit the factory alone, which is expensive and often impractical for overseas manufacture.
- Consistency: an audit looks at the manufacturer's processes, not just at one sample valve, so it speaks to how every valve is made.
- Specification requirements: many operator and project specifications require API-monogrammed valves for pipeline, wellhead or other critical service. Check yours before you accept an alternative.
- Cost of failure: a nonconforming valve found in service, in a pipeline or at a wellhead, costs far more than any price difference at purchase.
- A monogram is not a guarantee of fit for your service. You still have to specify the valve correctly and, for critical orders, inspect it.
How to verify a manufacturer's claim
- Ask for the licence number and the specification it covers, not just a statement that the valve is "API certified".
- Search the manufacturer on API's Composite List and confirm the specification and the facility where your valve will be made.
- Confirm the licence covers the exact specification for your valve: 6D, 600, 594, 602, 608, 609, 6A and so on are licensed separately.
- State in the purchase order that the valve must carry the API Monogram, and check the nameplate shows the monogram and licence number on delivery.
- Ask for the manufacturer's quality certificates (API Spec Q1, ISO 9001), and keep third-party or customer inspection for critical orders: it complements the licence and does not replace it.
API licensing at RANGER-FZV
RANGER valves are manufactured by FZV, and the licences belong to the manufacturing facility. FZV's quality, environment, health and safety management system incorporates ISO 9001:2015, API Spec Q1 (API Q1 certified since 2007), ISO 14001:2015 and ISO 45001:2018, and FZV holds API Monogram licences for API 6A, API 6D, API 594, API 600, API 602, API 608 and API 609 products. See About RANGER and FZV and quality control.
RANGER can confirm its API licences on request. If a project requires the API Monogram, say so in your quote request, with the specification. For the standards behind the valves themselves, see API 6D vs API 600 valves and API 6D vs API 6A valves.
Frequently asked questions
What is the API Monogram?
It is a mark that a manufacturer licensed by the American Petroleum Institute may apply to products made to a specific API standard, together with its licence number. API licenses the manufacturing facility after auditing its quality system and its ability to build to the specification.
What is the difference between API Spec Q1 and the API Monogram?
API Spec Q1 is the quality management system standard for the petroleum and natural gas industry. The Monogram licence requires a quality system compliant with Q1 and also requires conformance to a product specification such as API 6D.
What does "built to the intent of API 6D" mean?
It means the manufacturer says it follows the API 6D requirements without an API licence. The statement is not audited by API, the valve cannot carry the monogram, and the buyer has to verify the claim.
How do I check that a manufacturer is licensed?
Search for the company on API's Composite List, a public list of licensees. Check that the specification you need and the facility that will make your valve are both covered.
Does a valve without the monogram fail to meet API?
Not necessarily, but its conformance is unverified. Without a licence nobody independent has audited the factory, so the buyer relies on the manufacturer's statement and its own inspection.
Request the brochure
The RANGER overview brochure summarizes the quality system, the certifications and registrations held by the manufacturer, and the audit and approval history.
Select what you'd like below and we'll email you secure download links.