Ranger Valve America

Technical Guide

What is a triple offset butterfly valve?

The short answer

A triple offset butterfly valve (TOV) is a high-performance butterfly valve whose stem is offset in two directions and whose sealing surface is a third, conical offset. Together the three offsets let the disc swing into its seat without rubbing until the final moment of closing. That gives bi-directional, zero-leakage shutoff with very little seat wear, and it makes the valve torque-seated: the closing torque creates the seal.

Ranger Valve America Ltd. · Last reviewed

What the three offsets are

  • First offset

    The center of the stem is offset behind the centerline of the seal ring and body seat interface, along the bore centerline. This gives a cam-like motion that makes the seal ring contact the body seat fully when the valve closes.

  • Second offset

    The center of the stem is also offset from the centerline of the valve bore. With the stem offset in two planes, the disc moves with a more complete cam action, and the seal ring can move freely away from and into the body seat.

  • Third offset

    The axis of the sealing cone is offset from the centerline of the stem. The body and seal ring have a conical sealing surface, with an optimal seat angle of between 15 and 20 degrees. The seal ring rotates into and out of the seat without interference, and the contact area stays correct.

A valve with only the first offset rubs on its seat through a large part of the stroke. A double offset valve reduces this to the last few degrees of travel. With the third offset, RANGER's design has no interference between the seal ring and the seat through the whole rotation, until the disc seats at the end.

Why a TOV is torque-seated

A triple offset valve seals by torque. The actuator or gear operator applies torque to the shaft at the end of the stroke, and that torque pushes the seal ring into the seat. The harder it closes, the tighter the seal. On opening, the torque falls away quickly and the disc moves freely.

Two things follow. First, the actuator has to be sized to deliver the sealing torque at your maximum differential pressure, not just to move the disc. Second, friction in the valve is wasted sealing torque, so design details such as the stem packing, the stem finish and the bearings matter. RANGER uses engineered preformed packing, controlled stem surface finishing and precision machined bearings to pass more of the input torque to the sealing faces.

Concentric, double offset and triple offset compared

ConcentricDouble offsetTriple offset
SeatResilient linerResilient or metalMetal, or laminated metal and graphite
Rubbing in the strokeDisc contacts the liner through the strokeContact only near the closed positionNone until final seating
Seat wearLiner wears with cyclingModerateMinimal, even after extensive cycling
Fire-safeDepends on the liner designDepends on the seatAll-metal construction is inherently fire-safe
Typical serviceGeneral water and utility serviceModerate pressure and temperatureSevere service: high temperature, tight shutoff, refining, chemical and oil and gas
API 609Category ACategory BCategory B

What to specify

  • State the pressure class, the design temperature range and the flow direction. A TOV seals in both directions.
  • Choose the seal ring for the service. A laminated seal ring (stainless steel and graphite) suits mild to severe service. A solid stainless steel ring with a hard face suits severe service with entrained debris.
  • Choose the body style: double flanged (short or long pattern), butt weld, lug or wafer.
  • Specify the leakage test (API 598), the fire test (API 6FA or API 607), and the fugitive emission requirement if one applies.
  • Give the actuator the sealing torque at maximum differential pressure, and ask for an ISO 5211 mounting flange for easy actuation.
  • Do not choose a butterfly valve for pigging: the disc stays in the flow path, so a TOV is not a full-bore pigging valve.

Triple offset butterfly valves from RANGER

RANGER triple offset butterfly valves run 2" – 80" (maximum size varies by class), Class 150 – 1500, designed to API 609 Category B. Maximum size by class: Class 150 and 300 to 80 in, Class 600 to 36 in, Class 900 to 24 in and Class 1500 to 12 in. They are available double flanged (short and long pattern), butt weld, lug and wafer. Features include an anti-blowout stem with three independent retention methods, graphite performance packing for low fugitive emissions, a hard-faced carbide alloy seat with a multi-layer seal ring, and an ISO 5211 top flange.

See triple offset butterfly valves, and for low-temperature service the cryogenic valves range, which includes ultra-low temperature butterfly valves.

Frequently asked questions

What does triple offset mean?

The stem is offset behind the seal plane and to one side of the bore centerline, and the sealing cone is offset from the stem axis. Together these let the disc close without rubbing against the seat until the end of the stroke.

Is a triple offset butterfly valve zero-leakage?

It is designed for bi-directional, zero-leakage shutoff, with seat leakage tested to API 598. Because it is torque-seated, the actuator must deliver the sealing torque.

Why is a triple offset valve called torque-seated?

Its seal is created by the closing torque applied to the shaft. The higher the closing torque, the tighter the seal, and the torque drops quickly as the valve opens.

What are the seal ring options?

A laminated stainless steel and graphite seal ring for mild to severe service, or a solid stainless steel ring with a hard face for severe service where debris is present.

Is a triple offset valve fire-safe?

RANGER describes the design as fire-safe because of its all-metal construction and hard-faced body seat, with testing to API 6FA and API 607.

Request the brochure

The triple offset valve catalogue and the one-page TOV snapshot show the three offsets with diagrams, the seal ring options, key features and standards.

Select what you'd like below and we'll email you secure download links.

Catalogue

Snapshot & One-Pager